Single Band Handheld Transceiver

Home » Products » Handheld Transceiver » Single Band Handheld Transceiver » AT-289 Single Band Handheld Transceiver

Technical Specifications

Frequency Range VHF:136-174MHz VHF:350 -390MHz UHF: 400-480MHz UHF:450-520MHz
Channel Capacity 128 channels
Channel Spacing 25KHz (Wide Band) 20KHz(Middle Band) 12.5KHz (Narrow Band)
Phase-locked Step 5KHz, 6.25KHz
Operating Voltage 7.4V DC ±20%
Battery Life More than 14 Hours (1500mAh), by 5-5-90 work cycle
Frequency Stability ±2.5ppm
Operating Temperature -20 ℃ ~ + 55 ℃
Size 260×60×35mm (with battery pack, antenna)
Output Power 4/5W
IP Rate IP55
Multi-Scan Mode VFO scan+ channel scan+ priority scan+ CTCSS scan+ DCS scan.
Encode and Decode CTCSS+DCS+DTMF
VOX Function 6 levels
Weight 208 g (with battery pack, antenna)
Receiving Part(ETSI EN 300 086 Standard Test)
Wide band Narrow band
Sensitivity(12dB SINAD) ≤0.25μV ≤0.35μV
Adjacent Channel Selectivity ≥70dB ≥60dB
Intermodulation ≥65dB ≥60dB
Spurious Rejection ≥70dB ≥70dB
Audio Response +1~-3dB (0.3~3KHz) +1~-3dB (0.3~2.55KHz)
Hum & Noise ≥40dB ≥ 36dB
Audio Distortion ≤5%
Audio Power Output 1000mW/10%
Transmitting Part(ETSI EN 300 086 Standard Test)
Wide band Narrow band
Power Output 5W/2W/0.5W
Modulation 16KΦF3E 11KΦF3E
Adjacent Channel Power ≥70dB ≥65B
Hum & Noise ≥40dB ≥36dB
Spurious Emission ≤-36dB ≤-36dB
Audio Response +1~-3dB (0.3~3KHz) +1~-3dB (0.3~2.25KHz)
Audio Distortion ≤5%

Safety Information for Users
Transceiver is an excellent device designed with advanced technology, so please observe the following precautions to perform your obligation, avoid personal injury, and ensure safe usage of transceiver.
1. Keep the transceiver and accessories away from children.
2. Please do not try to open or modify the transceiver without permission. Non-professional process may also cause damage.
3. Please use assorted battery and charger to avoid damage.
4. Please use assorted antenna to ensure the communication distance.
5. Please do not expose the transceiver to direct sunlight for a long time, nor place it close to heat appliances.
6. Please do not put the transceiver in excessively dusty or humid areas.
7. Do not use harsh chemicals, cleaning solvents to clean the transceiver.
8. Do not transmit without antenna.
9. When using this transceiver, we recommend transmitting for 1 minute and then receiving for 4 minutes. Continuous transmitting for long time or working in high power will heat the back of the transceiver.
10. Do not place the transceiver's hot back close to any surface of plastic.
11. If any abnormal odor or smoke detected coming from the transceiver, turn off the power and take off the battery pack and its case. Then contact local dealers.

We is a professional single band handheld transceiver manufacturer and supplier in China. We provide a vast array of products, including dual band mobile repeater / signal booster, dual band handheld transceiver, single band walkie talkie and more.

Related Names
Shopping Mall Used Hand Held Interphone | Hand Two Way Radio for Hotel Use | LCD Display Hand Type Intercom

Feedback Form
Other Products